[Integrations](https://spiral.ai/integrations) › [Factory Droid](https://spiral.ai/integrations/factory-droid) › [PixVerse Lipsync](https://spiral.ai/integrations/factory-droid/pixverse-lipsync)

# How to Use PixVerse Lipsync in Factory Droid

PixVerse Lipsync gives existing video a spoken performance with matching mouth movements. It can voice a typed script or use a finished recording, making it useful for short explainers and re-voicing generated character clips.

|  |  |
| --- | --- |
| Model | PixVerse Lipsync |
| Available through | fal |
| Category | Video |
| Price | Up to $3.12 per run at the default inputs for 60 seconds of input. |
| Returns | video |
| Runs | In the background |
| Setup | About 2 minutes, no API key |

## Prompts to try with PixVerse Lipsync in Factory Droid

- Read the README and write a product introduction under 200 characters. Use PixVerse Lipsync with our existing presenter video to create a spoken draft, keeping the script focused on one benefit.
- Read the onboarding guide and write one welcome line under 200 characters. Use PixVerse Lipsync with the project's presenter clip and a built-in voice, then list the words I should check for pronunciation.
- Find the password-reset instructions in the support docs. Write a single spoken instruction under 200 characters and use PixVerse Lipsync with our existing support presenter video.
- Read the approved release notes and draft three alternative announcement lines, each under 200 characters. Use PixVerse Lipsync to make a separate speaking draft for each line with the same presenter clip.
- Pair the project's approved presenter video with its recorded welcome narration using PixVerse Lipsync. Prepare a review checklist covering phrase starts, phrase endings, mouth movement, and pronunciation.

## How to set up PixVerse Lipsync in Factory Droid

Pick the way that suits you. Each takes about two minutes.

### Use Spiral's MCP server

1. **Add the server**: Droid saves it to your user config, `~/.factory/mcp.json`, so it works in every project.

```bash
droid mcp add spiral https://api.spiral.ai/mcp --type http
```

2. **Sign in**: Start `droid`, type `/mcp`, select spiral and authenticate it. Sign in to Spiral in the browser and click Authorize. No API key.

3. **Check it**: Spiral shows as connected. needs authentication means the sign-in did not finish: run `/mcp` again.

```bash
droid mcp list
```

### Use the Spiral skill

1. **Send Factory Droid this message**: Your agent reads Spiral's skill and sets itself up.

```
set up https://spiral.ai/SKILL.md
```

2. **Sign in or paste a key**: Approve Spiral in the browser, or give the agent a key from the console.

### Use the Spiral CLI

1. **Install and sign in**: Installs the Spiral CLI, signs you in and adds its skill to your coding agents.

```bash
npx -y spiral-cli@latest init
```

### Call the Spiral API

1. **Create an API key**: In the console, under API keys.

2. **Run PixVerse Lipsync**: One request; the result comes back by polling or a webhook.

```bash
curl https://api.spiral.ai/v1/runs \
  -H "Authorization: Bearer $SPIRAL_API_KEY" \
  -H "Content-Type: application/json" \
  -H "Idempotency-Key: $(uuidgen)" \
  -d '{
    "provider": "fal",
    "model": "fal-ai/pixverse/lipsync",
    "input": {
      "video_url": "https://v3.fal.media/files/penguin/T-ONORYMYLoEOB9lXryA2_IKEy3yAyi1evJGBAkXGZx_output.mp4"
    }
  }'
```

Then paste one of the prompts above: Factory Droid finds PixVerse Lipsync on Spiral, shows the price and runs it.

Setup guide in the docs: https://spiral.ai/docs/quickstarts/factory-droid

## PixVerse Lipsync tools and prices

- [PixVerse Lipsync](https://spiral.ai/tools/fal/fal-ai/pixverse/lipsync) (fal): $0.052 per second.

## Settings you can ask for

| Setting | Allowed values | Default | Description |
| --- | --- | --- | --- |
| audio_url |  | — | URL of the input audio. If not provided, TTS will be used. |
| voice_id | Emily, James, Isabella, Liam, Chloe, Adrian, Harper, Ava, Sophia, Julia, Mason, Jack, Oliver, Ethan, Auto | Auto | Voice to use for TTS when audio_url is not provided |
| text |  | — | Text content for TTS when audio_url is not provided |

## What can you do with PixVerse Lipsync in Factory Droid?

Turn project documentation into short speaking segments for demos, onboarding, and support. A coding agent can prepare concise scripts from project files and pair them with existing presenter footage using PixVerse Lipsync.

### Product explainer openings

Give an existing presenter clip one clear sentence introducing a product benefit. Use a written script for the draft or a finished recording for a specific delivery.

### Customer support answers

Turn a short approved answer into a speaking segment using an existing presenter video. Keep each clip focused on one customer question.

### Training introductions

Add a concise spoken introduction to an existing instructor clip. Assemble the speaking segment with the lesson's supporting material afterward.

### Character dialogue drafts

Test a short line against an existing generated or stylized character video. Review whether the words and mouth timing suit the scene.

### Campaign message tests

Try several short approved messages against the same presenter footage. Compare how each line sounds and fits the shot.

### Revised team announcements

Give an existing spokesperson clip a revised spoken message. Use a clean recorded read when names or pronunciation need particular attention.

## Overview

- [fal](https://spiral.ai/providers/fal)
- [All Factory Droid guides](https://spiral.ai/integrations/factory-droid)

## PixVerse Lipsync in other agents

- [Amp](https://spiral.ai/integrations/amp/pixverse-lipsync)
- [ChatGPT](https://spiral.ai/integrations/chatgpt/pixverse-lipsync)
- [Claude](https://spiral.ai/integrations/claude-desktop/pixverse-lipsync)
- [Claude Code](https://spiral.ai/integrations/claude-code/pixverse-lipsync)
- [Cline](https://spiral.ai/integrations/cline/pixverse-lipsync)
- [Codex](https://spiral.ai/integrations/codex/pixverse-lipsync)
- [Cursor](https://spiral.ai/integrations/cursor/pixverse-lipsync)
- [Devin](https://spiral.ai/integrations/devin/pixverse-lipsync)
- [dots](https://spiral.ai/integrations/dots/pixverse-lipsync)
- [Gemini](https://spiral.ai/integrations/gemini/pixverse-lipsync)
- [Gemini CLI](https://spiral.ai/integrations/gemini-cli/pixverse-lipsync)
- [Google Antigravity](https://spiral.ai/integrations/antigravity/pixverse-lipsync)
- [goose](https://spiral.ai/integrations/goose/pixverse-lipsync)
- [Grok](https://spiral.ai/integrations/grok/pixverse-lipsync)
- [Grok Build](https://spiral.ai/integrations/grok-build/pixverse-lipsync)
- [Hermes](https://spiral.ai/integrations/hermes/pixverse-lipsync)
- [Instinct](https://spiral.ai/integrations/instinct/pixverse-lipsync)
- [Manus](https://spiral.ai/integrations/manus/pixverse-lipsync)
- [Muse](https://spiral.ai/integrations/muse/pixverse-lipsync)
- [Muse Code](https://spiral.ai/integrations/muse-code/pixverse-lipsync)
- [n8n](https://spiral.ai/integrations/n8n/pixverse-lipsync)
- [Notion](https://spiral.ai/integrations/notion/pixverse-lipsync)
- [OpenClaw](https://spiral.ai/integrations/openclaw/pixverse-lipsync)
- [opencode](https://spiral.ai/integrations/opencode/pixverse-lipsync)
- [Perplexity](https://spiral.ai/integrations/perplexity/pixverse-lipsync)
- [Raycast](https://spiral.ai/integrations/raycast/pixverse-lipsync)
- [VS Code](https://spiral.ai/integrations/vscode/pixverse-lipsync)
- [Windsurf](https://spiral.ai/integrations/windsurf/pixverse-lipsync)
- [Zapier](https://spiral.ai/integrations/zapier/pixverse-lipsync)

## More Factory Droid guides

- [PixVerse Extend Fast](https://spiral.ai/integrations/factory-droid/pixverse-extend-fast)
- [PixVerse Sound Effects](https://spiral.ai/integrations/factory-droid/pixverse-sound-effects)
- [PixVerse C1 Transition](https://spiral.ai/integrations/factory-droid/pixverse-c1-transition)
- [PixVerse Swap](https://spiral.ai/integrations/factory-droid/pixverse-swap)
- [PixVerse C1 Text to Video](https://spiral.ai/integrations/factory-droid/pixverse-c1-text-to-video)
- [PixVerse V3.5 Image to Video](https://spiral.ai/integrations/factory-droid/pixverse-v3-5-image-to-video)

## Questions about PixVerse Lipsync in Factory Droid

**Can Factory Droid use PixVerse Lipsync?**

Yes. Add Spiral to Factory Droid as an MCP server, and Factory Droid can find and run PixVerse Lipsync like any built-in tool.

**How much does PixVerse Lipsync cost in Factory Droid?**

Up to $3.12 per run at the default inputs for 60 seconds of input. You pay from your Spiral balance as you go, with no subscription, and a failed run is not charged. Your Factory Droid plan is separate.

**Do I need a fal account to use PixVerse Lipsync in Factory Droid?**

No. Spiral runs PixVerse Lipsync on its own fal account. You sign in to Spiral once and never paste a key.

**How long does it take to set up PixVerse Lipsync in Factory Droid?**

About two minutes: add the server, then sign in, then check it.

**Does Factory Droid wait while PixVerse Lipsync runs?**

PixVerse Lipsync runs in the background. Factory Droid starts the run, checks on it and gives you the video when it's ready.

**What is PixVerse Lipsync useful for?**

Use it to give an existing presenter or character video matching speech and mouth movements. Short explainers, dialogue drafts, and revised spoken lines are practical applications.

**How long can a spoken script be?**

PixVerse documents a 200-character limit for the standalone lip-sync text-to-speech workflow. Break longer explanations into short speaking segments.

**When should I use a recording instead of generated speech?**

Use a clean recording when pronunciation, rhythm, or tone matters. Generated speech is useful for testing a written line before recording a performance.

**What footage gives lip sync a better starting point?**

Choose a shot with a readable face, clear lighting, and manageable dialogue. PixVerse recommends front-facing or three-quarter views over fast-moving wide shots.

**How should I write a script for PixVerse Lipsync?**

Write short sentences with ordinary words and punctuation that marks natural pauses. Read the line aloud before generating to catch rushed or awkward phrasing.

