How to Use Claude Fable 5.2 in Hermes
Claude Fable 5.2 is built for difficult coding, deep research, and extended technical tasks. Compared with Claude Fable 5.1, Anthropic reports improvements in coding, reasoning, and vision.
Prompts to try with Claude Fable 5.2 in Hermes
Copy an example into Hermes, or ask in your own words.
Each Monday, use Claude Fable 5.2 to review the technical research excerpts supplied for this run. Produce a brief covering new findings, conflicting evidence, and three questions for further investigation. Cite the supplied sources and keep the brief under 800 words.
Each morning, use Claude Fable 5.2 with high reasoning effort to analyze the incident summaries supplied for this run. Identify recurring failure patterns, separate confirmed causes from hypotheses, and return a prioritized investigation list with supporting evidence.
Each Friday, use Claude Fable 5.2 to turn the supplied experiment results into an investigation handoff. State what was tested, what the results support, what remains unresolved, and the next useful experiment. Complete every section before ending.
Each week, use Claude Fable 5.2 to compare the current architecture proposal with the requirements supplied for this run. Identify newly unmet requirements and unresolved tradeoffs. Return a decision brief under 600 words with evidence for each finding.
At the end of each day, use Claude Fable 5.2 to synthesize the supplied technical investigation updates. Produce a finished report covering completed work, contradictory findings, open questions, and next actions. Diagnose ordinary recoverable obstacles before declaring the report blocked.
How to set up Claude Fable 5.2 in Hermes
Pick the way that suits you. Each takes about two minutes.
Use the Spiral skill
- Send Hermes this message
Your agent reads Spiral's skill and sets itself up.
set up https://spiral.ai/SKILL.md
- Sign in or paste a key
Approve Spiral in the browser, or give the agent a key from the console.
Use Spiral's MCP server
- Add the server and sign in
Hermes opens your browser: sign in to Spiral and click Authorize. No API key. When Hermes asks Enable all tools? \[Y/n/select], answer Y: n cancels without saving the server, and select hides the tools you leave out.
hermes mcp add spiral \ --url https://api.spiral.ai/mcp \ --auth oauth \ --connect-timeout 300
- Check it
In a chat that was already open, run /reload-mcp.
hermes mcp list hermes mcp test spiral
Use the Spiral CLI
- Install and sign in
Installs the Spiral CLI, signs you in and adds its skill to your coding agents.
npx -y spiral-cli@latest init
Call the Spiral API
- Create an API key
In the console, under API keys.
- Run Claude Fable 5.2
One request; the result comes back by polling or a webhook.
curl https://api.spiral.ai/v1/runs \ -H "Authorization: Bearer $SPIRAL_API_KEY" \ -H "Content-Type: application/json" \ -H "Idempotency-Key: $(uuidgen)" \ -d '{ "provider": "anthropic", "model": "anthropic/claude-fable-5.2", "input": { "messages": [ { "role": "system" } ] } }'
Then paste one of the prompts above: Hermes finds Claude Fable 5.2 on Spiral, shows the price and runs it.
Claude Fable 5.2 providers and prices
Spiral runs Claude Fable 5.2 through Anthropic. Open a card for today's price, with every fee included.
Up to $0.21372 per run at the default inputs. $10.40 per 1M input tokens, $0.26 per 1M cached input tokens, $13.00 per 1M cache write tokens, $20.80 per 1M 1-hour cache write tokens, $52.00 per 1M output tokens.
Settings you can ask for
Ask Hermes for any of these in your prompt.
| Setting | Allowed values | Default | Description |
|---|---|---|---|
| Max tokens | 1 to 128000 | The most output tokens to generate. On a reasoning model the reasoning tokens count toward it: a cap too low for the effort can end with no answer (finish_reason length). | |
| Reasoning effort | low, medium, high, xhigh, or max | high | How much the model reasons. |
| Parallel tool calls | on or off |
Every API field of Claude Fable 5.2 is on its tool page: open its card above.
What can you do with Claude Fable 5.2 in Hermes?
Turn recurring technical evidence into research briefs and investigation handoffs with Claude Fable 5.2. Define the evidence to review and the finished report expected on each run.
Diagnose a difficult software bug
Ask Claude Fable 5.2 to trace a failure through the relevant code, identify a reproducible cause, and propose a focused fix with verification.
Plan a complex code change
Have Claude Fable 5.2 map dependencies, identify behavior that must stay consistent, and develop an implementation plan with acceptance checks.
Compare technical approaches
Give Claude Fable 5.2 competing designs and explicit requirements. Request a recommendation that identifies assumptions, tradeoffs, and unanswered questions.
Synthesize technical research
Provide source excerpts and ask Claude Fable 5.2 to reconcile competing findings, distinguish evidence from inference, and identify the next questions to investigate.
Turn analysis into a technical report
Ask Claude Fable 5.2 to develop supplied findings into a finished report with recommendations, supporting evidence, and clearly stated gaps.
Review a multistep technical investigation
Have Claude Fable 5.2 assess completed experiments, identify unresolved hypotheses, and produce a prioritized plan for the remaining investigation.
More on Claude Fable 5.2 and Hermes
Claude Fable 5.2 in other agents
Questions about Claude Fable 5.2 in Hermes
Can Hermes use Claude Fable 5.2?
Yes. Add Spiral to Hermes as an MCP server, and Hermes can find and run Claude Fable 5.2 like any built-in tool.
How much does Claude Fable 5.2 cost in Hermes?
Up to $0.21372 per run at the default inputs. $10.40 per 1M input tokens, $0.26 per 1M cached input tokens, $13.00 per 1M cache write tokens, $20.80 per 1M 1-hour cache write tokens, $52.00 per 1M output tokens. You pay from your Spiral balance as you go, with no subscription, and a failed run is not charged. Your Hermes plan is separate.
Do I need an Anthropic account to use Claude Fable 5.2 in Hermes?
No. Spiral runs Claude Fable 5.2 on its own Anthropic account. You sign in to Spiral once and never paste a key.
How long does it take to set up Claude Fable 5.2 in Hermes?
About two minutes: add the server and sign in, then check it.
Does Hermes wait while Claude Fable 5.2 runs?
Claude Fable 5.2 runs in the background. Hermes starts the run, checks on it and gives you the text, json when it's ready.
What is Claude Fable 5.2 best suited for?
Use it for difficult coding, multistep research, and technical analysis that needs a finished deliverable. Give it a concrete result to produce and clear criteria for completion.
How much context and output can Claude Fable 5.2 handle?
It supports a one-million-token context window and up to 128,000 output tokens. These are token limits, so avoid treating them as fixed page or word counts.
Which reasoning effort should I use?
Start with high effort and compare results on representative tasks. Increase effort for difficult work only when testing shows a benefit; lower it when the results still meet your requirements.
Can I turn Claude Fable 5.2 thinking off?
Adaptive thinking is always enabled. Adjust effort to control thinking depth, and request a specific answer length separately.
What should I do if Claude Fable 5.2 stops before finishing?
State the remaining deliverable and tell it to continue through ordinary, recoverable obstacles. Early stopping is more common at lower effort levels, so test high effort for extended tasks.
Start using Claude Fable 5.2 in Hermes
One Spiral account for every tool your agent needs. No subscription; you pay per run.
Paste this into Hermes:
set up https://spiral.ai/SKILL.md


