Spiral gives your agent every tool with one account. Browse the tools →

Amp · VideoReleased 2026-03-05

How to Use LTX 2.3 Pro Retake in Amp

LTX 2.3 Pro Retake revises a selected section of an existing video while preserving the rest. Unlike LTX 2.3 Fast, it supports targeted edits to footage and its soundtrack.

Prompts to try with LTX 2.3 Pro Retake in Amp

Copy an example into Amp, or ask in your own words.

Use LTX 2.3 Pro Retake on assets/launch-demo.mp4 from second 2 through second 6. Replace picture and sound: a medium shot shows the presenter smiling, then saying, "Your next task starts here." Keep the camera static and the lighting soft. Save the result beside the original for review.

LTX 2.3 Pro RetakeAmp
Try asking
  • Read the product color guidance in this repository, then use LTX 2.3 Pro Retake on seconds 0 through 4 of assets/product-shot.mp4. Request the approved product color while retaining the shot's composition and original soundtrack. Save a comparison clip.

  • Use LTX 2.3 Pro Retake on seconds 3 through 7 of assets/mascot.mp4. Replace only the picture: the clay robot slowly raises one hand and waves once, with consistent soft lighting and a static camera. Save the result as a separate candidate.

  • Use LTX 2.3 Pro Retake to revise seconds 1 through 5 of assets/teaser.mp4. Replace only the picture with a gentle camera push toward the product on the table. Keep the product centered and use one consistent window-light direction. Save the retake for visual review.

  • Use LTX 2.3 Pro Retake on seconds 0 through 5 of assets/outro.mp4. Replace only the audio with a calm voice saying, "Pick a task. Make it happen." Request quiet room ambience underneath. Save the result and flag it for a listening check.

How to set up LTX 2.3 Pro Retake in Amp

Pick the way that suits you. Each takes about two minutes.

Use Spiral's MCP server

  1. Add the server

    No header and no client ID or secret: Amp registers itself with Spiral.

    amp mcp add spiral https://api.spiral.ai/mcp
  2. Sign in

    Start amp. Amp opens Spiral's sign-in page in your browser: sign in, pick the organization and click Authorize. No API key.

  3. Check it
    amp mcp doctor

Use the Spiral skill

  1. Send Amp this message

    Your agent reads Spiral's skill and sets itself up.

    set up https://spiral.ai/SKILL.md
  2. Sign in or paste a key

    Approve Spiral in the browser, or give the agent a key from the console.

Use the Spiral CLI

  1. Install and sign in

    Installs the Spiral CLI, signs you in and adds its skill to your coding agents.

    npx -y spiral-cli@latest init

Call the Spiral API

  1. Create an API key

    In the console, under API keys.

  2. Run LTX 2.3 Pro Retake

    One request; the result comes back by polling or a webhook.

    curl https://api.spiral.ai/v1/runs \
      -H "Authorization: Bearer $SPIRAL_API_KEY" \
      -H "Content-Type: application/json" \
      -H "Idempotency-Key: $(uuidgen)" \
      -d '{
        "provider": "fal",
        "model": "fal-ai/ltx-2.3/retake-video",
        "input": {
          "video_url": "https://v3b.fal.media/files/b/0a90e00e/eNWXGtaGyZO--e6KcJh-3_171_video.mp4",
          "prompt": "Change flower to red rose"
        }
      }'

Then paste one of the prompts above: Amp finds LTX 2.3 Pro Retake on Spiral, shows the price and runs it.

LTX 2.3 Pro Retake providers and prices

Spiral runs LTX 2.3 Pro Retake through fal. Open a card for today's price, with every fee included.

falVideo
LTX Video 2.3 Pro · Retake Video
fal-ai/ltx-2.3/retake-video

Settings you can ask for

LTX 2.3 Pro Retake works from your video URL and prompt. Ask Amp for any of these in your prompt.

SettingAllowed valuesDefaultDescription
Start time0 to 200

The start time of the video to retake in seconds

Duration2 to 205

The duration of the video to retake in seconds

Retake modereplace_audio, replace_video, or replace_audio_and_videoreplace_audio_and_video

The retake mode to use for the retake

Every API field of LTX Video 2.3 Pro · Retake Video is on its tool page: open its card above.

What can you do with LTX 2.3 Pro Retake in Amp?

Revise short sections of demo and launch videos using the same project notes that guide development. A coding agent can turn those notes into targeted retake requests and save comparison clips for review.

Product color tests

Request a different product color in a short section of an existing showcase clip, then compare the result with the original composition.

Performance revisions

Try a different visible reaction in an existing scene, such as a slow smile or a hesitant glance. Describe the gesture rather than an abstract emotion.

Short dialogue revisions

Request a new spoken line in a selected section of an existing clip. Regenerate picture and sound together when the performance also needs to change.

Soundtrack alternatives

Try a different sound treatment for an existing scene while retaining its picture. Audition the result carefully, especially when generating ambience without speech.

Camera movement studies

Request a gentle push-in or a static-camera alternative for a short section of existing footage. Compare how each treatment directs attention to the subject.

Lighting alternatives

Test a different lighting treatment within an existing shot, such as soft window light or a single warm lamp. Keep the lighting instructions consistent.

Animation revisions

Request a simpler action in a selected section of an existing animated clip. Keep the subject and visual style explicit so the result is easy to compare.

Questions about LTX 2.3 Pro Retake in Amp

Can Amp use LTX 2.3 Pro Retake?

Yes. Add Spiral to Amp as an MCP server, and Amp can find and run LTX 2.3 Pro Retake like any built-in tool.

How much does LTX 2.3 Pro Retake cost in Amp?

$0.13 per second. Billed on `duration`, default 5. You pay from your Spiral balance as you go, with no subscription, and a failed run is not charged. Your Amp plan is separate.

Do I need a fal account to use LTX 2.3 Pro Retake in Amp?

No. Spiral runs LTX 2.3 Pro Retake on its own fal account. You sign in to Spiral once and never paste a key.

How long does it take to set up LTX 2.3 Pro Retake in Amp?

About two minutes: add the server, then sign in, then check it.

Does Amp wait while LTX 2.3 Pro Retake runs?

LTX 2.3 Pro Retake runs in the background. Amp starts the run, checks on it and gives you the video when it's ready.

What is LTX 2.3 Retake useful for?

Use it when a short section needs another attempt: a different visual treatment, a revised performance, or new sound. It starts from an existing video and regenerates the selected section.

Can I change the picture while keeping the original soundtrack?

Yes. Replace only the video when the existing sound already works; replace both when the picture and sound need to change together. Retake preserves the content outside the selected section.

What resolution does LTX 2.3 Retake produce?

The documented output is 1920×1080 landscape or 1080×1920 portrait. Input footage is center-cropped to that aspect ratio, so check subjects near the edges.

What should I put in a retake prompt?

Describe the desired shot, the subject's action, the lighting, and any camera movement. Keep the scene focused, describe sound when replacing it, and put any spoken line in quotation marks.

What should I check before accepting a retake?

Check whether the requested details actually appeared, then watch the edited section in context. Listen closely to sound-only passages: the model card warns that generated audio without speech may have lower quality.

Get started

Start using LTX 2.3 Pro Retake in Amp

One Spiral account for every tool your agent needs. No subscription; you pay per run.

Paste this into Amp:

Set up Amp

set up https://spiral.ai/SKILL.md
Are you an AI agent? See setup options