How to Use LTX 2.3 Pro Retake in opencode
LTX 2.3 Pro Retake revises a selected section of an existing video while preserving the rest. Unlike LTX 2.3 Fast, it supports targeted edits to footage and its soundtrack.
Prompts to try with LTX 2.3 Pro Retake in opencode
Copy an example into opencode, or ask in your own words.
Use LTX 2.3 Pro Retake on assets/launch-demo.mp4 from second 2 through second 6. Replace picture and sound: a medium shot shows the presenter smiling, then saying, "Your next task starts here." Keep the camera static and the lighting soft. Save the result beside the original for review.
Read the product color guidance in this repository, then use LTX 2.3 Pro Retake on seconds 0 through 4 of assets/product-shot.mp4. Request the approved product color while retaining the shot's composition and original soundtrack. Save a comparison clip.
Use LTX 2.3 Pro Retake on seconds 3 through 7 of assets/mascot.mp4. Replace only the picture: the clay robot slowly raises one hand and waves once, with consistent soft lighting and a static camera. Save the result as a separate candidate.
Use LTX 2.3 Pro Retake to revise seconds 1 through 5 of assets/teaser.mp4. Replace only the picture with a gentle camera push toward the product on the table. Keep the product centered and use one consistent window-light direction. Save the retake for visual review.
Use LTX 2.3 Pro Retake on seconds 0 through 5 of assets/outro.mp4. Replace only the audio with a calm voice saying, "Pick a task. Make it happen." Request quiet room ambience underneath. Save the result and flag it for a listening check.
How to set up LTX 2.3 Pro Retake in opencode
Pick the way that suits you. Each takes about two minutes.
Use Spiral's MCP server
- Add the server
Leave out --global to add Spiral to the current project only. No header and no client ID or secret: opencode registers itself with Spiral.
opencode mcp add spiral --global --url https://api.spiral.ai/mcp
- Sign in
Your browser opens. Sign in to Spiral, pick the organization and click Authorize, then return to the terminal. No API key. Inside opencode, /mcps starts the same sign-in.
opencode mcp auth spiral
- Check it
Spiral shows as connected.
opencode mcp list
Use the Spiral skill
- Send opencode this message
Your agent reads Spiral's skill and sets itself up.
set up https://spiral.ai/SKILL.md
- Sign in or paste a key
Approve Spiral in the browser, or give the agent a key from the console.
Use the Spiral CLI
- Install and sign in
Installs the Spiral CLI, signs you in and adds its skill to your coding agents.
npx -y spiral-cli@latest init
Call the Spiral API
- Create an API key
In the console, under API keys.
- Run LTX 2.3 Pro Retake
One request; the result comes back by polling or a webhook.
curl https://api.spiral.ai/v1/runs \ -H "Authorization: Bearer $SPIRAL_API_KEY" \ -H "Content-Type: application/json" \ -H "Idempotency-Key: $(uuidgen)" \ -d '{ "provider": "fal", "model": "fal-ai/ltx-2.3/retake-video", "input": { "video_url": "https://v3b.fal.media/files/b/0a90e00e/eNWXGtaGyZO--e6KcJh-3_171_video.mp4", "prompt": "Change flower to red rose" } }'
Then paste one of the prompts above: opencode finds LTX 2.3 Pro Retake on Spiral, shows the price and runs it.
LTX 2.3 Pro Retake providers and prices
Spiral runs LTX 2.3 Pro Retake through fal. Open a card for today's price, with every fee included.
Settings you can ask for
LTX 2.3 Pro Retake works from your video URL and prompt. Ask opencode for any of these in your prompt.
| Setting | Allowed values | Default | Description |
|---|---|---|---|
| Start time | 0 to 20 | 0 | The start time of the video to retake in seconds |
| Duration | 2 to 20 | 5 | The duration of the video to retake in seconds |
| Retake mode | replace_audio, replace_video, or replace_audio_and_video | replace_audio_and_video | The retake mode to use for the retake |
Every API field of LTX Video 2.3 Pro · Retake Video is on its tool page: open its card above.
What can you do with LTX 2.3 Pro Retake in opencode?
Revise short sections of demo and launch videos using the same project notes that guide development. A coding agent can turn those notes into targeted retake requests and save comparison clips for review.
Product color tests
Request a different product color in a short section of an existing showcase clip, then compare the result with the original composition.
Performance revisions
Try a different visible reaction in an existing scene, such as a slow smile or a hesitant glance. Describe the gesture rather than an abstract emotion.
Short dialogue revisions
Request a new spoken line in a selected section of an existing clip. Regenerate picture and sound together when the performance also needs to change.
Soundtrack alternatives
Try a different sound treatment for an existing scene while retaining its picture. Audition the result carefully, especially when generating ambience without speech.
Camera movement studies
Request a gentle push-in or a static-camera alternative for a short section of existing footage. Compare how each treatment directs attention to the subject.
Lighting alternatives
Test a different lighting treatment within an existing shot, such as soft window light or a single warm lamp. Keep the lighting instructions consistent.
Animation revisions
Request a simpler action in a selected section of an existing animated clip. Keep the subject and visual style explicit so the result is easy to compare.
More on LTX 2.3 Pro Retake and opencode
Overview
LTX 2.3 Pro Retake in other agents
Questions about LTX 2.3 Pro Retake in opencode
Can opencode use LTX 2.3 Pro Retake?
Yes. Add Spiral to opencode as an MCP server, and opencode can find and run LTX 2.3 Pro Retake like any built-in tool.
How much does LTX 2.3 Pro Retake cost in opencode?
$0.13 per second. Billed on `duration`, default 5. You pay from your Spiral balance as you go, with no subscription, and a failed run is not charged. Your opencode plan is separate.
Do I need a fal account to use LTX 2.3 Pro Retake in opencode?
No. Spiral runs LTX 2.3 Pro Retake on its own fal account. You sign in to Spiral once and never paste a key.
How long does it take to set up LTX 2.3 Pro Retake in opencode?
About two minutes: add the server, then sign in, then check it.
Does opencode wait while LTX 2.3 Pro Retake runs?
LTX 2.3 Pro Retake runs in the background. opencode starts the run, checks on it and gives you the video when it's ready.
What is LTX 2.3 Retake useful for?
Use it when a short section needs another attempt: a different visual treatment, a revised performance, or new sound. It starts from an existing video and regenerates the selected section.
Can I change the picture while keeping the original soundtrack?
Yes. Replace only the video when the existing sound already works; replace both when the picture and sound need to change together. Retake preserves the content outside the selected section.
What resolution does LTX 2.3 Retake produce?
The documented output is 1920×1080 landscape or 1080×1920 portrait. Input footage is center-cropped to that aspect ratio, so check subjects near the edges.
What should I put in a retake prompt?
Describe the desired shot, the subject's action, the lighting, and any camera movement. Keep the scene focused, describe sound when replacing it, and put any spoken line in quotation marks.
What should I check before accepting a retake?
Check whether the requested details actually appeared, then watch the edited section in context. Listen closely to sound-only passages: the model card warns that generated audio without speech may have lower quality.
Start using LTX 2.3 Pro Retake in opencode
One Spiral account for every tool your agent needs. No subscription; you pay per run.
Paste this into opencode:
set up https://spiral.ai/SKILL.md


